Descargar Imprimir esta página
Dri-Eaz Velo El Manual Del Propietario
Ocultar thumbs Ver también para Velo:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Velo
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
WARNING! To reduce the risk of fire or
electric shock, do not use this fan with any
solid-state speed control device.
WARNING! Unit must be grounded. Do not
use with an extension cord. Connect only to an outlet provided
with a ground fault interrupting device.
WARNING! Never operate a unit with a damaged power cord, as
this may lead to electrical or fire hazards. If power cord is
damaged, it must be replaced by a cord of the same type and
amperage rating.
WARNING! Do not touch grills when unit is operating.
NOTICE: Keep motor dry. For indoor use only.
NOTICE: Unplug when not in use or when moving unit.
NOTICE: Do not allow children to play with or around the unit.
Be sure the unit is inaccessible to children when not attended.
NOTICE: Always operate the unit on a stable, level surface so it
cannot fall and cause injury.
Fig. A: Parts Identification
Inlet grill. Keep clear of
obstructions.
Pro: Variable speed
control with amp
readout
GFCI-protected power
outlet sockets with
reset switch.
Rear cord wrap under
bottom edge. Wrap cord
counter-clockwise and
secure with plug clip.
Fig. B: Operating Positions
Horizontal (for
horizontal surfaces)
07-01837E F504/F505-115V
Owner's Manual
& Velo
Pro Low Profile Airmover
Models F504 & F505 115V
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Phone: +1 800-932-3030 Fax: +1 360-757-7950 www.dri-eaz.com
The Velo Airmover produces a high rate of airflow to accelerate the
evaporation of moisture from materials for restorative drying.
Patents: http://www.LBpatents.com
Front Lift/Cord Wrap tab.
Wrap cord counter-
clockwise and secure with
plug clip.
Velo: On/Off and circuit
breaker reset switches
With stand for stairwells
and wall drying
(Pro model only)
WARNING! Do not alter or modify your Velo in any way. Use
only replacement parts authorized by Dri-Eaz Products, Inc.
Modifications or use of unapproved parts could create a hazard
and will void your warranty. Contact your authorized Dri-Eaz
distributor for assistance.
WARNING!
a) Do not operate any fan with a damaged cord or plug. Discard
fan or return to an authorized service facility for examination
and/or repair.
b) Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area and
where it will not be tripped over.
BEFORE YOU BEGIN
Warranty registration
Please visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using, maintaining
Carry strap
Left edge (for wall
Right edge (for
drying)
wall drying)
1
Outlet grill. Keep clear
of obstructions.
Stand folds out
and locks (Pro
only).
Vertical (for walls and
ceilings)
Dri-Eaz Products, Inc.

Publicidad

loading

Resumen de contenidos para Dri-Eaz Velo

  • Página 1 DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233, USA Phone: +1 800-932-3030 Fax: +1 360-757-7950 www.dri-eaz.com The Velo Airmover produces a high rate of airflow to accelerate the evaporation of moisture from materials for restorative drying. Patents: http://www.LBpatents.com R E A D A N D S A V E T H E S E I N S T R U C T I O N S WARNING! Do not alter or modify your Velo in any way.
  • Página 2: Transport And Storage

    2) remove the six screws from the base. Lift off the housing. Note that the Velo can be placed in a variety of positions for Retain screws and drying and air circulation. See Fig. B for details.
  • Página 3 SPECIFICATIONS FOR SERVICE CALL YOUR LOCAL DISTRIBUTOR or the Dri-Eaz Service Department at 800-932-3030. Model Velo (F504) Velo Pro (F505) Weight 21 lbs. | 9.52 kg 21 lbs. | 9.52 kg Be sure to visit warranty.drieaz.com and register your purchase.
  • Página 4 15180 Josh Wilson Road, Burlington, WA 98233, EE.UU. Teléfono +1 800- 932-3030 Fax: +1 360-757-7950 www.dri-eaz.com El Secador de Aire Velo produce una alta tasa de flujo de aire para acelerar la evaporación de la humedad del material para un secado restaurador.
  • Página 5: Transporte Y Almacenamiento

    (× 6) lugar, retire los cuatro tornillos del conjunto del Observe que la unidad velo se puede colocar en una gran variedad de impulsor 2 (como se muestra a posiciones para el secado y la circulación del aire. Véase la Fig. B para continuación), y...
  • Página 6 ESPECIFICACIONES PARA SERVICIO LLAME AL DISTRIBUIDOR LOCAL o al Departamento de Servicio Dri-Eaz 800-932-3030. Asegúrese de visitar Modelo Velo (F504) Velo Pro (F505) warranty.drieaz.com y registre su compra. Su registro nos ayudará a Peso 21 lbs. | 9,52 Kg 21 lbs. | 9,52 Kg ofrecerle información actualizada del producto según sea necesario.
  • Página 7 15180 Josh Wilson Road, Burlington, WA 98233, É.-U. Tél. : +1 800-932-3030 Téléc. : +1 360-757-7950 www.dri-eaz.com Le flux d’air à haute vitesse du ventilateur de séchage Velo accélère l’évaporation de l’humidité dans les matériaux, en vue d’un séchage rapide de restauration.
  • Página 8: Transport Et Rangement

    2) retirer les six vis présentes sur sa base. Retirez le À noter que le Velo peut être placé de diverses façons pour le séchage couvercle. Conservez les et la circulation d'air. La Figure B illustre ces positions d’utilisation.
  • Página 9 POUR UNE INTERVENTION, APPELER SON DISTRIBUTEUR LOCAL FICHE TECHNIQUE ou le service Dri-Eaz au 800-932-3030. Veillez à visiter Modèle Velo (F504) Velo Pro (F505) warranty.drieaz.com et à enregistrer votre achat. Votre enregistrement nous aidera à vous fournir s’il y a lieu les toutes dernières informations...

Este manual también es adecuado para:

Velo proF504F505Velo f504Velo pro f505