Installation - Blumfeldt 10030007 Manual De Instrucciones

A Ensure to check all parts are present:
a
b
c
d
B Site requirements
• The floor has to be capable of supporting the expected load.
• An adequate drainage system has to be provided to deal with overflow water.
• Because of the combined weight of the spa, water, and users, it is extremely important
that the base where the spa is installed is smooth, flat, level and capable of uniformly
supporting this weight for the entire time the spa is installed. If the spa is placed on
a surface, which does not meet these requirements, any damage caused by improper
support will void the warranty. It is the responsibility of the spa owner to assure the
integrity of the site at all times.
Indoors installation
Be aware of special requirements if you install the spa indoors:
• The floor must be able to withstand the capacity of the spa. The floor should be a non-
slip, level surface.
• Proper drainage is essential for indoor spa installation. When building a new room for the
spa it is recommended that a floor drain be installed.
• Humidity is a natural side effect of spa installation. Determine the effects of airborne
moisture on exposed wood, paper, etc. in the proposed location. To minimize these
effects it is best to provide plenty of ventilation to the selected area. An architect can
23

Installation

Spa pool
PU cover with foil
and zipper
Inflation hose
Filter cartridge
e
f
g
Filter cartridge cover
Rubber plug
Repair kit