DELTA DORE DFR TYXAL+ Manual De Instalación página 8

1. Presentation
The detector can be associated with a DELTA DORE wireless X3D
alarm and control system.
Functional check and maintenance:
Do not try to trigger the alarm any other way (using a lighter, etc.) because
you could damage the detector or even start a fi re.
Your detector has been designed to require the minimum maintenance pos-
sible. However, some simple actions need to be performed once a year.
After having removed the detector:
cleaner, using a soft brush or a vacuum cleaner accessory.
It is recommended that the detector be replaced after 10 years.
Additional installation recommendations, as well as the "Mandatory
Performance Declaration" for this equipment are available in the
product fi le for DFR TYXAL+ on our website www.deltadore.com
Material manufactured by SHD BP10809 under reference DOF79R.
2. Location
Locations to avoid
Do not install the detector:
The smoke could be blown away from the detector or be diluted.
+50°C;
risk of detector not working correctly.
rooms are not recommended.
and cause false alarms.
You must check that your detector is functional once
a month or after each battery change.
Pressing the "test" button on the case for a few
seconds will light up the LED and the detector will
emit 2 beeps.
- 8 -
EN