Changing The Screen Display Mode - FUNAI iLO IWT3206 Manual Del Usuario

DTV

CHANGING THE SCREEN DISPLAY MODE

2 types of display modes can be selected in the digi-
tal mode.
You can select your favorite display mode and enjoy
the program.
POWER
VOL
n
CH K / L
1
4
7
-/ENT
MUTE
AUDIO
INFO
1
Display the menu screen.
• Press [MENU].
The following menu screen is displayed.
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
2
Select "DTV SET UP".
• Using [CH K / L ], select "DTV SET UP".
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
• When you press [VOL X ], the menu screen will
be displayed as below.
DTV DISPLAY [LETTERBOX]
DTVCC
D.S.T.[Daylight Saving]
TIME ZONE
DTV/TV
VOL X / Y
o
VOL
CH m
p
2 3
5 6
8 9
0 +100
MENU
SLEEP MENU
INPUT
SELECT
[ON]
[ALASKA]
3
Select the display mode.
• Every time you press [VOL X / Y ],
"LETTERBOX" and "ZOOM" will be switched
alternately.
D10-0
LETTERBOX
[LETTERBOX]
Display the digital-supported program in full-
screen.
Black borders will spread in the upper and
lower screen.
[ZOOM]
Enlarge and display the center area of the digital-
supported program.
The right and left side of image will be cut off.
4
To exit the menu, press [MENU].
NOTE:
You may not switch the display mode depending on the pro-
gram.
D10-0
ZOOM
27
EN