Steren CCTV-137 Manual De Instrucciones

Dome analog color camera
SEGURIDAD
Instruction manual
V0.1
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
The instructions of this manual are for reference about the
product. There may be differences due to updates. Please
check our website (www.steren.com) to obtain the latest
version of the instruction manual.
• Do not use or store the equipment in places where there dripping or
splashing water; it may cause a malfunction.
• Do not install near heat sources or electromagnetic noise (electric
motors, electric fences, power switches, etc.).
• Do not install outdoors.
• Do not install the wiring inside of a pipe where power lines are located,
as this may distort the image.
• To capture images and videos in high quality, be sure to make the connections correctly.
• For distances under 100m use Cat5e UTP cable.
• If you use coaxial cable, the distance should not exceed 50 m.
• The camera must be connected into a no break, to protect it from electrical shock and to
keep it running in case of an outage.
With this dome type camera you can monitor you home, office or store, easily. You can
connect it to any analog DVR and record all events, even if you are not in the place; or if you
want only to monitor in real time, you can connect it directly to a screen.
It is very discreet and easy to install due to the size and structure; just need to turn the base
up to aim it to the required area. Besides, it includes a night sensor and IR LED to offer you
night vision.
The camera has 720 TVL of resolution and it is manufactured with anti-rust aluminum for
best durability.
* Night vision
*Automatic gamma and
white balance control
C
B
D
E
F
G
INSTRUCTIONS
Installation
1
Select the location where you want to
install the camera. It is recommended to
be on a solid surface and fixed (wall,
roof, carport or under an overhang).
2
3
Use the base to
mark.
4
CCTV-137
IMPORTANT
CAUTIONS
HIGHLIGHTS
* Anti-rust aluminum case
* For indoor use
PARTS
A
A
Infrared LEDs
B
Lens
C
Sensor
D
Case
E
Mounting base
F
Power connector
G
Video connector
5
6
7
A B
Connection
0116m
Trouble
Cannot see
images
Image with interference
Image with color changes
Input: 12V - - - 1 000 mA
Minimum lux: 0.01 lux/F1.2
Format: 976 x 496
Image sensor: CMOS a color
Video output: BNC
Resolution: 1.0 MP
Operating temperature: -10°C 50°C
Product design and specifications are subject to change without notice.
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice, product box or
package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was
received.
4. Steren sell parts, components, consumables and accessories to customer, as well
as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky
batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel,
improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.
RETAILER INFORMATION
Name of the retailer __________________________________
Address ____________________________________________
Product ____________________________________________
C
Brand ______________________________________________
MAINTENANCE
TROUBLESHOOTING
Solution
• Turn on the DVR or monitor.
• Make sure that have made correctly all connections to the
camera and the monitor or DVR.
• Check that the power supply is undamaged.
• Check the wiring; It could be damaged.
• Try another power source; it could be damaged.
• Make sure the wiring is in good condition.
• Check for unstable connections.
• Make sure the camera is not placed near a fluorescent
lamp.
SPECIFICATIONS
Product:
Dome analog color camera
Part number: CCTV-137
Brand: Steren
In case your product
fails or have questions,
please contact your
nearest dealer. If you
are in Mexico, please
call to our Call Center.
01 800 500 9000