Led Indication; Care And Maintenance - Velleman BTSP1 Manual Del Usuario

7. Restoring to Default Settings
• To reset the speakerphone to its original settings, place it in standby mode.
• Press and hold both V+ and V- for ten seconds until the red and blue LEDs flash alternatively.
• Release both buttons. Press and hold both V+ and V- again for two seconds until the speakerphone emits two short beeps and
the LEDs stop flashing. The speakerphone will be switched off automatically.

8. LED Indication

Mode
Off
Switch on
Switch off
Standby before pairing
Standby after pairing
Standby
Talking
Pairing
Pairing completed
Mute
Charging
Charging completed

9. Care and Maintenance

• Do not expose the speakerphone to rain, humidity, high temperatures and direct sunlight.
• Protect the speakerphone from sharp objects to avoid scratches.
• Clean the speakerphone with a dry cloth. Do not use abrasive cleaning solvents.
• There are no user-serviceable parts. Do not attempt to disassemble the speakerphone.
• Store the speakerphone in a dry place away from dust, humidity and high temperatures.
BTSP1_v3
Red LED
Off
On for 3 sec
Flash every 3 sec
Flash every 3 sec
Flash alternatively
On
Off
7
Blue LED
Off
On for 3 sec
Flash every 3 sec
Flash every 15 sec
Flash every 3 sec
On
Off
Sound
bi
biiiiiiii
bi – bi – bi
bi – bi – bi
biiiiiiii
VELLEMAN