babyruf MBF 7010 Manual De Instrucciones página 18

Selecting the sensitivity for voice activation
Example: High.
Sensitivity
[9]
Baby alarm
The noise level indicator [1] provides a visual alert of sounds issued by the baby instead transmitting the acous­
tic signals.
Sound Alert
[9]
Sound Alert
[9]
[5]
When the baby alarm is activated, no acoustic signals are transferred from the transmitter unit to the
receiver unit.
Temperature
The ambient temperature of the transmitter unit is displayed on the receiver unit. You can set the temperature
unit for display and a tolerable temperature range.
Temperature unit
Temperature
[9]
[5]
Temperature range
Temperature
[9]
[5]
Temperature alert
You can set an acoustic signal to be issued when the temperature moves above or below the defined temperat­
ure range.
Temperature
[9]
Lullaby
You can play lullabies on the transmitter unit.
Lullaby
[9]
Lullaby appears in the display.
2 x [5]
Lullaby
[9]
2 x [5]
If you select Play All , the transmitter unit automatically stops playing the lullabies after 15 minutes.
18
High / Low
On?
Volume
[6]/
Degree F / Degree C
Set Range Up Limit / Low Limit
Temp Alert On?
Play? Select New
Play? Play All Lullaby appears in the display.
[8]
Define the setting.
Define the limit settings.
[6] / [8] [Select lullaby]
G