Channel Control; Selecting The Antenna; Setting The Channel Manager - Samsung LN-S4092D Instrucciones Del Propietario

Channel Control

Selecting the Antenna

Setting the Channel Manager

You can add or delete a channel so only channels you want are displayed.
1. Press the MENU button to display the menu.
Press the or buttons to select "Channel", then press the ENTER
2. Press the ENTER button to select "Antenna".
Press the or buttons to select "Air" or "Cable",
then press the ENTER
Press the EXIT button to exit.
Press the ANTENNA button on the remote control.
If the antenna is connected to ANT 1 IN (AIR),
select "Air" and if it is connected to ANT 2 IN (CABLE),
select "Cable".
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are
connected, select the antenna input you want. If the antenna
input is not selected properly, noise may appear on the screen.
1. Press the MENU button to display the menu.
Press the or buttons to select "Channel", then press the ENTER
2. Press the or buttons to select "Channel Manager",
then press the ENTER
3. Press the ENTER
4. Press the or buttons to select a channel to delete,
then press the ENTER
Press the or buttons to select "Delete", then press the ENTER
delete the channel.
English-32
button.
button.
button to select "All".
button.
button.
or
button.
button to