Battery Almost Empty; Led Status; Frequently Asked Questions - Marmitek Boomboom 77 Modo De Empleo

11 Battery almost empty

When the BoomBoom 77's battery is almost empty, the red LED
will blink. Follow the steps given earlier to charge the battery.

12 Led status

LED status
Blue LED lit continuously
Green LED lit continuously
Blue LED flashing rapidly (0.5s)
Blue LED flashing slowly (2s)
Red LED lit continuously
Red / blue LED lit continuously
Red LED flashing

13 Frequently asked questions

I am unable to pair my BoomBoom 77.
Check the following:
1. Ensure that the power adapter is connected and/or that the
battery is fully charged.
2. Ensure that the Bluetooth function on your mobile telephone
is on (check your phone's manual for reference).
3. Ensure that the distance between your mobile phone and the
BoomBoom 77 is no greater than 10 metres and that there
are no large obstacles in the way.
What is xptX Low Latency?
aptX Low Latency ensures a very short audio delay of less than
40 ms. With a regular Bluetooth connection, this is more than 100
ms. Both the transmitter and the receiver must have aptX Low
Latency to be able to use this feature. With the BoomBoom 55
and 77, the LED lights up green to indicate an aptX Low Latency
connection.
Do you have any other questions that have not been resolved by the above
information? Please go to www.marmitek.com
BOOMBOOM 77
Description
Connection
aptX Low Latency connection
Pairing mode
Standby
Charging
Charging / connected
Low battery
7