Before use
■
Before you use the appliance, ensure that . . .
–
–
■
Remove the protective film from the make-up mirror 1 .
■
Wipe the appliance with a damp cloth and then dry it well .
■
Insert the tapered part of the connecting piece 5 completely into the
mounting shaft 6 of the stand 8 . The connecting piece 5 is designed
such that it only completely fits into the mounting shaft 6 in a certain posi-
tion .
■
Gently turn the connecting piece 5 counter-clockwise until it clicks into
place .
■
Press the protruding parts of the stand lock 9 into the corresponding gaps
on the charging socket 7 .
operation
Charging the integrated battery
NoTE
►
The integrated battery takes approx . 3 hours to charge .
►
With a fully charged battery you can operate both lights at the same time
for approx . 1 .5 hours, or one light for approx . 3 hours .
►
Once the battery is fully discharged, press the bedside lamp button 3
or the mirror lighting button 4
will light up briefly .
1) Connect the mains adapter q to the charging socket 7 .
2) Insert the plug into a mains socket . The light surface on the bedside lamp 0
will light up briefly .
3) Once the battery is fully charged, remove the power plug from the mains
power socket .
Use as a bedside lamp
To use the appliance as a bedside lamp, proceed as follows:
1) Fold the make-up mirror 1 up completely .
2) If necessary, press the bedside lamp button 3
on the bedside lamp 0 on or off .
MKN 3.7 A1
the appliance is in working order,
all packaging materials have been removed .
. The light surface on the bedside lamp 0
to switch the light surface
GB│MT
37
■
│