First Alert DC-2 Guia De Inicio Rapido

Indoor/Outdoor Decoy Camera
Model DC-2
© 2013 BRK Brands, Inc. All rights reserved. Distributed
by BRK Brands, Inc., Aurora, Illinois 60504. BRK Brands,
Inc. is a subsidiary of Jarden Corporation (NYSE: JAH).
First Alert® is a registered trademark of the First Alert
Trust. Due to continuing product development, the product
inside the packaging may look slightly different than the
one on the package. 1 Year Limited Warranty- see inside
for details.
Getting to Know Your DC-2
Congratulations on purchasing your First Alert Security
Camera product. First Alert has been helping families and
businesses stay safe for over 50 years. By having a First Alert
Security Camera, you're taking the first step in protecting your
home or business from damage or theft.
SAFETY PRECAUTIONS
• Do not drop, puncture, or disassemble the
camera body.
• Do not expose the camera to high temperatures.
• Use the device with care. Avoid pressing hard on the
camera body.
CHECK PACKAGE CONTENTS
After unpacking the carton, check the contents for damage.
Contact your supplier or dealer immediately if any part is
missing or damaged. Your Model DC-2 decoy security camera
consists of:
• Indoor/outdoor decoy camera (1)
• Camera stand (1)
• Mounting Screws (3)
• User's manual (1)
M08-0470-000
Setting Up
GENERAL INSTALLATION GUIDELINES
• Do not attempt to open a camera. There are no user-serviceable
parts inside.
• When using power tools wear safety goggles. Before drilling holes
through a wall or ceiling, check for hidden electricity cables and
water pipes.
INSTALLING THE DC-2 CAMERA
1) Select the position for the camera and install a mounting bracket
Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.
2) Screw the camera onto the bracket. Tighten the lock nut to
secure the camera on the bracket
Angle Lock
Screw
Camera Lock
Camera Mounting
Screw
Dimensions:
Bracket
2.80"(H) 2.27"(W) x 5.50"(D)
Standing mount position,
stand at 90º
3) Adjust camera to the proper viewing angle.