Installation; Rack Mounting; Power Connection - Work Pro MX 61 Manual De Uso

EN

INSTALLATION

To ensure years of enjoyment from your MX 61, please read and undrstand this manual thorougly
before using the unit.
INSPECTION
Your MX 61 was carefully packed at the factory in packing designed to protect the units in
shipment. Before installing and using your unit, carefully examine the packaging and all
contents for any signs of physical damage that may have occurred in transit.

RACK MOUNTING

The MX 61 fits into one standard 19" rack unit of space. Parts of the unit can become very warm
during use. This is normal during operation. Care should be taken to ensure that there is enough
space around the unit for cooling (at least 12 or 30 cm). Do not place the MX 61 on high
temperature devices such as power amplifiers, etc. Or the unit may overheat in operation. Also, do
not place the unit on speakers as this may cause them to move and/or fall due to speaker vibrations.
Although the unit´s chassis is shielded against radio frequency (RF) and electromagnet
interference (EMI), extremly high fields of RF and EMI should be avoided.

POWER CONNECTION

The MX 61 has an internal power supply and is designed to operate from an external AC source.
Power requirements for electrical equipment differ from area to area. Be sure to confirm that the
voltage selected by the voltage selector switch on the back panel is proper for your area (115 V
AC 60 Hz or 230 V AC 50 Hz)
When ready to operate, plug the AC cord into the power source. Make sure that the unit is
turned off before connecting to the AC power source to avoid possible loud transients which
can damage your speakers or your ears, specially when monitoring with headphones.
MX 61
USER MANUAL/MANUAL DE USO PAG 3