HAMPTON BAY BPT18-34ALE-1 Guía De Uso Y Cuidado página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation (continued)
6
Using quick connect
WARNING: Wiring must comply with all applicable electrical
codes. Turn OFF power before removing or installing
connectors.
WARNING: COPPER TO COPPER ONLY. Do not use on
Aluminum wire.
CAUTION: Accessory part AA (quick connect) should meet
installation instructions below.
NOTE: Connector is reusable on solid wires of the same wire
gage or smaller. Do not reuse connector on stranded wires.
Strip the wires so half of the bare wire is showing.
Grip the wire firmly and push the stripped end of
the wire into the open port of connector (AA). Use
only one stripped end of the wire per port.
Verify the stripped end of the wire is fully inserted
to the back of the connector (AA).
NOTE: Important wire information. Maximum temperature
rating 105°C (221°F). 600 volts maximum for building wire
and 1000 volts maximum in signs and lighting fixtures.
Flammability rating of the wires must meet UL94-V2. The
acceptable wire range includes: Solid: 12-20 AWG,
Stranded: 12-16 AWG (≤19 STRAND); 18AWG (7 STRAND),
Tin bonded: 14-18 AWG (≤19 STRAND).
Connecting wiring from unit to
7
house
WARNING: Make sure that the main power is off.
WARNING: Failure to wire this product correctly could result
in electrical shock, fire hazards, or damage to the product.
Consult a licensed electrician if you are unsure of your ability
to correctly install wiring.
CAUTION: If your house wires do not match these colors,
determine what each house wire represents before
connecting. You may need to consult a licensed electrician to
determine this safely.
Connect wires using the quick connector (AA) or
wire nut (not provided).
Connect the green (or bare) ground wire to the
green ground lead.
Connect the black wire from the unit to the black
house 120V AC line.
Connect the white wire from the unit to the white
house 120V AC line.
Connect the red wire of the Night Light to the black
house 120V AC line.
Replace the junction box cover. Do not pinch the
lead wires.
9
Please contact 1-877-527-0313 for further assistance.
www.hamptonbay.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bpt18-54al

Tabla de contenido