Parts List; Tools Needed; Attaching The Handle - Monster MST3605STG Manual Del Propietário

PARTS LIST

Push Handle
TOOLS
NEEDED
ASSEMBLY INSTRUCTIONS

Attaching the Handle

Align the hole on the handle with the second hole
down on the drawer assembly as shown. Insert M8 x
19 handle bolts through handle, through the legs and
bumpers, and into the drawer assembly as shown.
Secure with star bolts from handle bolt kit and hand
tighten.
Attach remaining M8 x 17 bolts (on the opposite side
from push handle) directly into legs.
Tightening Bolts (not shown)
Use a T40 driver to tighten all bolts.
MST3605STG/MST3605SMB/MST3605SG/MST3605SORNG
M8 x 19, T40 star bolt (4)
for Push Handle
M8 x 17, T40 star bolt (4)
for Opposite Side from
Push Handle
T40 Star Driver
2 People
or Star Key
2
Barrel Keys
and lock
Liners (8)
rev. 10/04/18