Matco Tools PWH1000 Instrucciones De Operación página 6

PWH1000 Auto-Darkening Solar Powered Four Sensor Welding Helmet
• Parts And Assembly
PWH1234-1
REF PART
NO. NO.
1 PWH1234-1
2 *
3 *
4 *
5 *
6 *
7 **+
8 **+
9 **+
10 **+
11 **+
12 **+
13 +
14 +
15 ***
Maintenance
• Replacing Front Lens Plate. (See fig. 4)
Replace the front lens plate if it is damaged (cracked, scratched, soiled or pitted).
• Replacing The Inside Lens Plate. (See fig. 4)
Replace the inside lens plate if it is damaged (cracked, scratched, soiled or pitted).
• Releasing The Shade Cartridge. (See fig. 5)
• Fitting New Cartridge. (See fig. 6)
• Cleaning
Clean helmet by wiping with a soft cloth. Clean cartridge surfaces regularly. Do not use strong cleaning
solutions. Clean sensors and solar cells with a damp clean cloth and wipe dry with a lint-free cloth.
PWH1000
PWH1LENS
DESCRIPTION
Shell (Welding Mask)
Rubber Holder
Front Lens Plate
Auto-Darkening Filter
Inside Lens Plate
Holder
Block Nut
Washer
Angle Adjustable Washer
Left Limitation Washer
Screw
Right Limitation Washer
Headgear
Sweatband
Battery
(included in lens assembly)
fig. 4
PWH1B
QTY.
1
1
1
1
1
1
2
2
2
1
2
1
1
1
2
fig. 5
6
PWH1234-3
* Available in lens assembly, including #2-6,15: PWH1LENS
** Available in hardware kit, including #7-12:
+ Available in headgear set, including #7-14:
*** Available in set of two replacement batteries: PWH1B
Also Available:
PWH1-3 Set of 5 Replacement Front Lens Plates (ref#3)
PWH1-5 Set of 5 Replacement Inside Lens Plates (ref#5)
PWH1234-4 Set of 10 Replacement Sweat Bands (ref#14)
fig. 6
PWH1234-2
PWH1234-3
PWH1234-2
08/23/06