Publicidad
Idiomas disponibles
Idiomas disponibles
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY.
THIS INSTRUCTION MANUAL CONTAINS
IMPORTANT SAFETY INFORMATION.
READ
CAREFULLY
INFORMATION
THIS TOOL.
• Always operate, inspect and maintain
this tool in accordance with American
National Standards Institute Safety Code
of Portable Air Tools (ANSI B186.1) and
any other applicable safety codes and
regulations.
• For
maximum durability of parts, oper-
ate this tool at 90 psig/6.2 bar max.
air pressure with 3/8" diameter air
supply hose.
• Always wear impact-resistant eye and
face protection when operating or
performing maintenance on this tool.
Always wear hearing protection when
using this tool.
• High
permanent hearing loss. Use hearing pro-
tection as recommended by your employ-
er or OSHA regulation.
• Keep the tool in efficient operating
condition.
• Operators and maintenance personnel
must be physically able to handle the
bulk, weight and power of this tool.
• Air
severe injury. Never direct air at
yourself or others. Always turn off
the air supply, drain hose of air pres-
sure and detach tool from air supply
before installing, removing or adjusting
any accessory on this tool, or before
performing maintenance on this tool.
Failure to do so could result in injury.
Whip hoses can cause serious injury.
Always check for damaged, frayed or
loose hoses and fittings, and replace
immediately. Do not use quick detach
couplings at tool. See instructions for
correct set-up.
SXC208
SXC208_OpMan011105.indd 2
THIS
INSTRUCTION
MANUAL
AND
UNDERSTAND
BEFORE
OPERATING
safety,
top
performance
sound
levels
can
under
pressure
can
• Air powered tools can vibrate in use.
ALL
• Place the tool on the work before
• Slipping, tripping and/or falling while
and
• Keep body working stance balanced
• Anticipate and be alert for sudden
• Do not carry tool by the hose. Protect the
cause
• Keep away from rotating end of tool.
• Do not lubricate tools with flammable or
cause
• Accessory retainers should be used to
• Do
• Do not remove any labels. Replace
• Use
2
Vibration,
repetitive
motions
uncomfortable
positions
extended periods of time may be harmful
to your hands and arms. Discontinue use
of tool if discomfort, tingling feeling or
pain occurs. Seek medical advice before
resuming use.
starting the tool.
operating air tools
can be
cause of serious injury or death. Be
aware of excess hose left on the
walking or work surface.
and firm. Do not overreach when
operating the tool.
changes in motion during start up and
operation of any power tool.
hose from sharp objects and heat.
Do not wear jewelry or loose clothing.
Secure long hair. Scalping can occur
if hair is not kept away from tool and
accessories. Choking can occur if
neckwear is not kept away from tool
and accessories.
volatile liquids such as kerosene, diesel
or jet fuel.
prevent discharge or ejection of the
accessory which might cause injury.
not
force
tool
beyond
rated capacity.
damaged labels.
accessories
recommended
Sunex Tools.
Rev. 03/28/05
or
over
a major
its
by
3/28/05 9:41:07 AM
Publicidad
