Matco Tools GG60A Instrucciones De Operación

• Operating Instructions • Warning Information
Pump ratio (max) ............................................................................ 40:1
Output per stroke ........................................................ .038 in (cubed)
Pneumatic inlet pressure (min) .................................................. 40 Psig
Pneumatic inlet pressure (max) ................................................. 90 Psig
Grease output pressure ........................................................ 6,000 Psig
Grease reservoir capacity ..........................................................14.5 oz.
Operating temperature range............................................... 0 to 120° F
Weight (empty) ......................................................................... 4.74 lbs
Weight (full) .............................................................................. 4.84 lbs
Lubricant up to NLGI.............................................................. #2 Grease
Pneumatic port inlet ..........................................................1/4 - 18 NPT
Grease port outlet............................................................1/8 - 27 UNPT
EXTREME PRESSURE MAY CAUSE WHIP HOSE TO BURST. USE ONLY APPROVED HOSES
AND FOLLOW THE HOSE INSTRUCTIONS AND WARNINGS.
THIS AIR OPERATED GREASE GUN CAN DEVELOP HIGH PRESSURES - UP TO 6,000 PSIG
(414 BAR). USE SAFETY GLASSES AND GLOVES WHILE OPERATING THE GUN. KEEP HANDS
CLEAR OF THE EXPOSED RUBBER PORTION OF THE HOSE WHILE OPERATING THE GUN
WITH HOSE.
IF FLUID APPEARS TO PENETRATE THE SKIN, SEEK IMMEDIATE MEDICAL ATTENTION. DO
NOT TREAT AS A SIMPLE CUT.
BE SURE THE TRIGGER IS NOT DEPRESSED WHEN ATTACHING THE GUN TO AN AIR INLET
HOSE.
AVOID ACCIDENTAL STARTING.
HOLD THE HOSE ONLY BY THE METAL SPRING GUARDS ON THE END.
DO NOT ALLOW THE HOSE TO KINK. DO NOT BEND THE HOSE IN A TIGHT RADIUS.
REPLACE THE HOSE AT FIRST SIGN OF WEAR, KINK OR DAMAGE TO THE OUTSIDE
JACKET.
USE ONLY HIGH PRESSURE GREASE GUN HOSE AS A REPLACEMENT.
GG-60A
GG60A.indd 1
• Parts Breakdown
S P E C I F I C A T I O N S
FOR YOUR SAFETY
AND TO PREVENT INJURY:
GG60A
The Matco Air Operated Continuous Shot
Grease Gun is a fully pneumatic powered tool.
The gun is designed for manual lubrication
of grease points in automotive and truck
applications. The gun has a single action
pump that delivers grease each time the
trigger is depressed and the plunger moves
forward.
FOR YOUR SAFETY
AND TO PREVENT INJURY:
High pressure hazard.
Wear safety goggles.
Do not exceed 60 psi with hose or 90 psi with
solid extension. To do so may cause personal
injury.
Copyright © Professional Tool Products, 2006
1
GG60A
Continuous Shot
Air Grease Gun
w/ Swivel Head
Read and carefully study the
operating instructions before
unpacking and operating the
Continuous Shot Air Grease
Gun. The gun must be operated,
maintained and repaired by a
person who is familiar with the
operating instructions. Operate the
gun only after you have read and
understand this operation manual.
All rights reserved.
Rev. 07/10/06
7/18/06 3:17:48 PM