Archos 404 Serie Manual De Instrucciones página 8

Making a Recording Using the CamCorder Application of your ARCHOS Device
• On the Home Screen Home Screen, select the CamCorder
• Your ARCHOS device now powers the camera. On the screen, you see the image the camera is cur-
rently seeing. This preview screen thus permits you to adjust the position or direction of the camera
before you start your recording.
Settings Settings
• A number of settings such as resolution and bitrate can be adjusted. Normally you need not change
these settings.
• To access these recording parameters To access these recording parameters, press
• To return to the pre-recording screen To return to the pre-recording screen, press the ARCHOS device's
• Setting the Time Stamp parameter to 'ON' will show the date and time on the recorded image.
Note: For information on the other settings, please refer to the section on making a video recording in the user Note:
manual of your ARCHOS device. Please note that the parameter Format does not exist as the setting is pre-deter-
mined by the camera. For the same reason, the parameter Source can only be set to 'Composite' or 'Black & White'.
• To start recording, press the To start recording
• To pause and restart your recording To pause and restart your recording, press the
• To stop and save your recording, press the To stop and save your recording
Note: alternatively, you can press the Start/Stop button on your camera controller to start and stop Note:
the recording.
6
CamCorder icon and press
MENU
button or select the Start recording
OK
button or select the Pause
OK
button.
to open the CamCorder application.
OK
and select the Settings Settings
button.
Start recording menu item.
Pause
menu item.
or Resume Resume menu item.