Extraction Air System Assembly - KÜPPERBUSCH VKM1800 Instrucción De Uso, Instalación Y Mantenimiento

5.3. Extraction air system assembly

The hob and the fan can be connected with a fl exible hose
or a fl at duct.
The exhaust air components for on these two options are
supplied with the hob and are fi tted into each other accor-
ding to the illustration. Shorten the fl at duct with a fi ne saw
if necessary.
On point c
The fl exible connection piece is used for a worktop thick-
ness of 600 mm. Please make sure that installation is as
taut and crease-free as possible by shortening excess
material.
On point f
Apply sealing tape to the plinth fan connecting pieces (f)
before attaching the adapter piece (d) to the plinth fan (e).
Important:
The components must all be fi rmly fastened as shown
with the adhesive tape enclosed after they have been
attached.
22 of 80
Instructions for assembly
Exhaust air duct components
Fan
Sealing tape
Plinth fi lter (optional):
Charcoal fi lter
or
GB
or
or