Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. Insert rubber glide foot "K" into the threaded hole on
the side of the corner. Spin M10 nut "N" onto the top
of the rubber glide foot.
5. Repeat steps 1 through 4 on the Front Left corner "A".
6. Attach 3" wheel "J" to Rear Right corner "F".
a. Insert extra bolt into the axle hole from the inside of
the corner. Insert the bolt into the wheel housing just
far enough to act as a "hanger" for the nylon wheel
bushing "R".
7. Carefully align 3" wheel "J", and insert M6-55 bolt
"S" through hole in the outer edge of wheel housing,
through wheel "J", through nylon bushing "R".
8. Secure the axle bolt using using M6 flange nut "P".
9. Repeat steps 6-8 for back-left corner "E", assembly is
now complete!
10. Lift your machine or item to be mobilized into place.
CAUTION: Check stability in both the up and down
positions before using. Failure to follow
safety and assembly instructions may result
in personal injury or damage to product.
4
6
7
8
9
7
Publicidad
Tabla de contenido
