TEMPUR North Manual Del Usuario página 7

Problem Possible cause
The remote
There is no mains supply voltage.
control
or motor
The remote control or motor system is
system is not
not functioning.
functioning
The overheating protection or
system protection has been triggered.
The motor is
The unit's fuse may have been
suddenly
triggered or may be broken.
not capable of
movement.
There is no mains supply voltage.
A lead-in connection has been
interrupted (mains power, hand
switch or auxiliary drive).
The battery-
The battery is empty.
operated
Reset
function is not
Battery is not connected.
functioning.
There is no mains supply voltage.
The motor,
The motor, accessory or remote control
accessory
or remote is defective.
control is not
functioning.
The remote control has not been
programmed with the teach-in.
The remote control batteries are empty. Replace the batteries.
The overheating protection or system
protection has been triggered.
The unit's fuse may have been
triggered.
The motors
or massage
motors are
The remote control batteries are empty. Replace the batteries.
suddenly not
capable of
movement.
Radio interference
There is no mains supply voltage.
A cable has been disconnected (to the
mains power, massage motors, drives
or accessory).
16668_TEMPUR_North_Warranty_and_Care_Book_Adjustable_EU.indd 5 16668_TEMPUR_North_Warranty_and_Care_Book_Adjustable_EU.indd 5
Solution
Connect the mains power.
Please contact your supplier or sales agent.
Remove the overload (change or remove the load). Allow
the system to rest for 20 to 30 minutes with the mains
power unplugged. If this does not resolve the problem,
contact your supplier or sales agent.
Please contact your supplier or sales agent.
Connect the mains power.
Check the cables and reinsert them, if required.
Check the battery and replace if necessary.
Connect the battery.
Connect the mains power.
Connect the connecting cable between the HE150 and the
external power supply.
Please contact your supplier or sales agent.
Carry out the teach-in routine for the remote control.
Remove the overload (change or remove the load). Allow
the system to rest for 20 to 30 minutes with the mains
power unplugged. Please contact your supplier or sales
agent.
Please contact your supplier or sales agent.
Try to re-establish the wireless connection.
Connect the mains power.
Check the cables and reinsert them, if required.
5
19/12/2019 15.35 19/12/2019 15.35