Napa 815-6242 Instrucciones De Ensamblado

ASSEMBLY INSTRUCTIONS
No tools required for product assembly.
. Place metal base with casters down on a flat surface.
2. Insert the painted end of the lift cylinder into the center hole of the metal base. To avoid damaging
the cylinder, do not force or hammer cylinder into hole.
3. Place the seat on top of the unpainted end of the lift cylinder, and push down on the seat firmly.
4. To complete assembly, place your weight on the seat by sitting down. This will lock the lift
cylinder and seat into place.
Care Instructions:
Clean lift cylinder with a damp cloth. DO NOT use harsh chemicals to clean cylinder or seat.
815-6242 Parts Breakdown & Operating Manual
Ref. # Part# Description
 Seat
2 RS8509SL Plate with lever
2a Screw (M6)
2b Nyloc Nut (M6)
3 RSTSAC Air Cylinder
4 Bottom Base
5 * Caster w/washer & nut 5
Only Ref.#'s identified by Part# are available for
purchase separately.
* Replacements available as part# BK720-272
 (pair) of casters with nyloc nuts and washers.

815-6242
PNEUMATIC
CREEPER SEAT
Qty.


4
4


rev. 09/29/07