Connection Diagram; Led Indicators - Axis P13-E Serie Guia Del Usuario

Page 22

Connection diagram

The following connection diagram gives an example of how to connect an auxiliary device to the
network camera.

LED indicators

LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
3.3V
max. 50mA
D
G
S
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to 10 Mbit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to Setup > System
Options > LED settings. See the online help files for more information.
Steady during startup, during reset to factory default or when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
AXIS P13-E Network Camera Series Installation Guide
1
2
3
4
E.g. push button