Pairing A Bluetooth Device - Precision PA0825B Manual Del Usuario

PAIRING A BLUETOOTH DEVICE

1. Turn on your Bluetooth device.
2. Turn on the speaker to Bluetooth. The unit will automatically go into pairing mode
to search for Bluetooth device. You will know you are in pairing mode when the
LED is flashing quickly.
3. If your Bluetooth device is not able to pair to the unit, disconnect the unit's
previous Bluetooth connections and reset the Bluetooth module by holding play
key.
4. Navigate to your Bluetooth device's setup screen, find "PA0825B" and connect.
5. Bluetooth indicator light will light up steady when connected.
6. To disconnect pairing, hold PLAY/PAUSE button.
Note: You can connect with a smart phone or tablet PC with Bluetooth.
BATTERY
.
1 This unit is a battery powered PA loudspeaker. Be sure that you have completely
charged the battery prior to first use to maximize the battery's life span. The unit
takes approximately 2 hours to fully charge. The unit will automatically begin
charging once the power cord is connected to a power source and the power
switch is better set to off.
.
2 Upon completion of the charging, please disconnect the power cable.
.
3 With standard usage, a fully charged battery can play for about 2.5 hours.
.
4 Battery can be recharged about 300 times in its life time.
.
5 When not in use, the speaker should always be set to OFF to prevent the unit from
draining the battery.
.
6 When the unit is not used for prolonged periods of time, the battery will gradually
lose its power. It is recommended to fully charge the battery regularly.
7