Safety Rules - Palmgren 11405A Manual De Funcionamiento Y Lista De Piezas

Palmgren Operating Manual & Parts List
DESCRIPTION
Palmgren 4" Industrial Angle Vise permits
accurate positioning at any angle from
horizontal to vertical. Moving jaw and
leadscrew are ground for smooth opera-
tion. An optional graduated swivel base
allows vise to be rotated 360° and locked
at any desired angle.

SAFETY RULES

• Understand and obey all safety instruc-
tions supplied with drill press, mill, or
other machines on which vise is used.
• Bolt or clamp vise to work surface in at
least two mounting locations using
mounting flanges provided on base.
• Be sure workpiece is clamped securely
between jaws before starting machin-
ing operation.
B
Figure 1 - Dimensions
C
L
• Do not over tighten—vise can develop
a large clamping force. Use only force
which is needed.
• Do not pound or hammer on work-
piece. This vise is designed to clamp
the workpiece in a desired position for
machining operations only.
DIMENSIONS
Refer to Figure 1.
Stock No.
Jaw Width
Throat Depth
Jaw Opening
Overall Height without
Swivel Base
Overall Height with
Swivel Base
Base Length
Base Width
2
11405A
11405A
A 4"
B 1 3 /
C 4"
H 5"
H 6 3 /
L 12"
W 5 3 /
A
H
W
"
4
"
16
"
8