Programming The Universal Remote; Programming Your Remote To Control Your Source - Bose RC-PWSII Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Universal Remote Control Programming Guide

Programming the universal remote

You can program the universal remote to control your TV, DVD,
Blu-ray Disc
player, cable/satellite box, game system or DVR.
Note: Your source may not be compatible with universal remote
controls. Refer to your source owner's guide for more
information.
Programming your remote to control
your source
1.
Power on your source.
2.
Locate the code for your source's brand in the Universal
Remote Device Codes book (provided).
3.
On the remote control, press and hold the appropriate source
button until all six source buttons glow, then release.
For example, to program your TV, press and hold
Only the appropriate source button glows.
4.
On the number keypad, enter the code for your source's
brand.
Note: If all six buttons blink three times, you entered an
invalid code.
Repeat steps 3 and 4.
5.
Press + on the volume button.
4
6.
Test the source for basic functions:
• TV: press the channel buttons. Press
settings menu appears. Press
• Cable/satellite box: press
guide appears.
Press
and
• DVD or Blu-ray Disc
menu appears. Press
• Game system: press
menu.
7.
If your source responds to basic functions, press
save your settings.
If your TV does not power off
Use the remote control's code scanner to find the code for your
source.
.
1.
Press + on the volume button to try another code.
Note: If all six buttons blink three times, you have cycled
through all codes for your source.
2.
Test the source for basic functions (see step 6 in "Program
the remote to control your source").
3.
Repeat steps 1 and 2 until your source responds.
4.
Press
to save your settings.
. The
and
to navigate.
. The programming
to navigate.
player: press
. The settings
and
to navigate.
and
to navigate through your
to

Publicidad

Tabla de contenido
loading

Tabla de contenido