Installation; Mounting The Pdu - Tripp-Lite PDUMH15NET Manual Del Propietário

Pdu controlable para rack
Ocultar thumbs Ver también para PDUMH15NET:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation

Mounting the PDU

The PDU supports four primary mounting configurations: 1U Rack, 0U Rack (Vertical),
Wall and Under-Counter.
Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before
mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may
not be appropriate for all applications. Exact mounting configurations may vary. Screws for attaching the
mounting brackets and cord retention shelf to the PDU are included. Use only the screws supplied by the
manufacturer or their exact equivalent (#6-32, 3/16" flat head).
1-1
1U Rack Mounting: Use 3 screws
to attach each of the 2 longer
A
mounting brackets
as shown. You can mount the PDU
in a recessed position by attaching
the mounting brackets so they
extend beyond the front panel of
the PDU. (If you plan to use the
cord retention shelf, attach the
mounting brackets in a recessed
position.) Mount the PDU in the
rack by inserting 4 user-supplied
screws
C
brackets
holes of the rack rails.
1-2
0U Rack Mounting: Use 3 screws
to attach each of the 2 shorter
A
mounting brackets
as shown. Mount the PDU
vertically by inserting 2 or more
user-supplied screws
the mounting brackets
mounting points in the rack or
rack enclosure.
1-3
Wall Mounting: Use 3 screws
to attach each of the 2 shorter
mounting brackets
as shown. Mount the PDU to the
wall by inserting 2 or more user-
supplied screws
mounting brackets
secure mounting points.
16-11-162-933687.indb 3
to the PDU
B
through the mounting
and into the mounting
B
to the PDU
B
through
C
and into
B
to the PDU
B
through the
C
and into
B
1-1
1-2
A
1-3
3
A
B
C
B
A
B
A
C
1/3/2017 4:41:46 PM
C

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pdumh20net

Tabla de contenido