Polycom SpectraLink 8020 Manual Del Usuario página 7

If you want to Then
Silence while
ringing
Change the
ring volume
Activate or
deactivate the
speakerphone
Adjust the
speaker volume
Adjust the
headset volume
Place a call on hold
Resume a held call
Mute the
microphone
End the call
Change the profile
Turn on the backlight
English
END
Press the key to silence the ring.
Press the up/down volume buttons on the side
of the handset during ringing.
Spkr
Press the softkey and speak towards the
handset. Note that this feature may be
unavailable in your facility.
Press the up/down volume buttons on the side
of the handset during the call.
Press the up/down volume buttons on the side
of the handset during the call.
Hold
Press the softkey.
LINE
Press the key followed by the line number
key.
Mute
Press the softkey.
END
Press the key. Be sure to do this at the end
of each call to return to the standby mode.
Prof
Press the softkey and use the
select a new profile while in standby mode.
The selected profile is marked with an asterisk
(*).
The backlight comes on when any key is
pressed or when there is an incoming call and
stays on for 10 seconds. It turns off after 10
seconds if another key is not pressed within
that period.
Nav
keys to
7