oneConcept 10029832 Manual Del Usuario página 14

• In the header, select the desired behaviour: Timer/Countdown. Select ADD TIMER
or ADD COUNTDOWN after that, accordingly.
Timer: Set the Timer, by specifying a time. With the check box ACTION, state
•
the behaviour (whether the socket is meant to switch ON or OFF to the specified
time). Finally, in the footer line, check the days on which the timer shall be acti-
vated.
Example:
Add two timers.
•
Set the first timer for 08:00 AM, set ACTION to ON and tick TUE(sday).
•
Set the second timer to 12:05 PM, set ACTION to OFF and tick WED(nesday).
•
Result: The socket will switch the connected household device ON on Tues-
•
day morning, and switch it off on Wednesday, shortly after noon.
• To deactivate the timer, wipe the switch icon to OFF:
Countdown: In the same way, you can activate a countdown: In the header, se-
•
lect COUNTDOWN and adjust the time after which the socket shall switch ("After
On = switch on after countdown; After Off = switch off after countdown).
• After successfully setting up the master socket, plug the slave socket into a household
mains socket. The LED starts flashing. Launch the app and add RF Adaptor (see be-
low). The operation resembles aforementioned operation of the master socket.
14
Slave socket: Setup and Operation