Grounding Instructions - Weston 61-0901-W Manual Del Usuario

WARNING!
Meat Slicer, make sure the Meat Slicer Motor is OFF and the PLUG
IS REMOVED FROM THE OUTLET/POWER SOURCE!
WARNING!
SHARP
BLADE

GROUNDING INSTRUCTIONS

GROUNDING
This appliance must be grounded while in use
to protect the operator from electrical shock.
The appliance is equipped with a 3-conductor
cord and a 3-prong grounding type plug to fit
the proper grounding-type receptacle. The
appliance has a plug that looks like Figure
A. An adapter, Figure B, should be used
for connecting Figure A plugs to two-prong
receptacles. The grounding tab which extends
from the adapter must be connected to a
permanent ground such as a properly grounded
outlet box as shown in Figure C using a metal
screw.
EXTENSION CORDS
Use only 3-wire extension cords which have
3-prong grounding-type plugs and a 3-pole
cord connector that accepts the plug from the
appliance.
an electrical rating not less than the rating of
the appliance. Do not use damaged extension
cords. Examine extension cord before using and
replace if damaged. Do not abuse extension
cord and do not yank on any cord to disconnect.
Keep cord away from heat and sharp edges.
4
Before cleaning, assembling or disassembling the
KEEP FINGERS AWAY FROM THE BLADE!
Always use completely assembled Meat Slicer
Protective/cut-resistant gloves are recommended
Use only extension cords having
HANDLE CAREFULLY!
NEVER FEED FOOD BY HAND.
ALWAYS USE THE FOOD PUSHER!
with Food Carriage and Food Pusher.
whenever handling the Blade!
Grounding
Prong
Circuit
Grounding
Conductor
Metal
Grounding
Screw
Cover of
Grounded
Outlet Box
Grounding
Means
AA2220
FIGURE A
FIG RE B
FIGURE C