Tabla de contenido
Publicidad
NOTE:
1.
Behavior at lock modes
Lock Mode
Button Lock
1. Lock all buttons on the front panel and RCU, except for
2. All the SET functions should be workable via RS32, even the
MENU Lock
1. Lock "MENU' key of front panel and RCU.
2. The Factory and Hospitality modes should not be blocked
POWER Lock
1. Lock "POWER" key on the front and RCU.
2. The SET_POWER on/off should be workable via RS232, but
3. Can not be unlocked by reset in OSD setting.
4. Will auto AC power-on in power-lock
5. Under power-lock, the set will not enter power saving when
Remote control
Lock the RCU keys, but keep the front panel buttons workable.
disable
2.
Set Date example
Date: 2017-3/15
Send:
0x 38 30 31 73 56 59 31 37 0D ("Y17")
Send:
0x 38 30 31 73 56 4D 30 33 0D ("M03")
Send:
0x 38 30 31 73 56 44 31 35 0D ("D15")
3.
Set Time example
Time: 16:27:59
Send:
0x 38 30 31 73 57 48 31 36 0D ("H16")
Send:
0x 38 30 31 73 57 4D 32 37 0D ("M27")
Send:
0x 38 30 31 73 57 53 35 39 0D ("S59")
"Power".
ones with according hot key in RCU like Mute,...etc.
for the model using MENU-combined key to enter these two
modes. Alternative approach will be indicated separately if
any limitation by model.
does not mean the POWER lock will be released under this
case.
no PC signal and neither not turn off when no other video
signals after 15min.
38
Behavior
Publicidad
Tabla de contenido
