When I click on Live View the image does not load?
1. Make sure that you are using a browser that supports ActiveX.
2. Second, make sure that you added ActiveX. See step 11 and 12 in Section 2: Configure
the IP Camera.
Can I use the TV-IP252P outdoors?
The TV-IP252P was designed for indoor use only.
If you still encounter problems or have any questions regarding the TV-IP252P, please contact
TRENDnet's Technical Support Department.
2. Click Internet Protocol (TCP/IP) and then
click Properties. Then click on Use the
following IP address, and make sure you
assign your network adapter an IP address in
the subnet of 192.168.10.x.
10