BLUE SKY PHG8732BZ Manual Del Usuario página 20

Make sure that the knob on the LP
tank is closed and turned clockwise
to a full stop. The cylinder supply
system must be arranged for vapor
withdrawal. Check that the control
knob on the control unit is turned off.
Hold the gas hose [E] and regulator
[F] in one hand and insert the nipple
into the valve outlet. Be sure the
nipple is centered in the valve outlet.
The coupling nut connects to the
large outside threads on the valve
outlet. Hand-tighten the coupling nut
clockwise until it comes to a full stop.
Firmly tighten by hand only. Do not
cross-thread.
Carefully lower the cylinder housing
[D] into place over the tank. Make sure
it is sitting evenly on the base [J].
To disconnect, fully close the tank
valve by turning clockwise. Turn the
coupling nut counterclockwise until
the gas hose and regulator detaches.
WARNING
Do not store a spare LP gas cylinder
under or near this heater.
20 | www.bluesk youtdoorliving.com
F
E
E
F
D
J