NOTE: Please follow the instructions carefully to ensure a safe and sturdy bed. Do not
fully tighten the bolts until all rails and guardrails are attached.
1. Unpack the units and confirm that you have all hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Attach three Side Stretchers (D) between the Posts (A and B) with six 5/8" Bolts (1).
3. Repeat the same procedure to combine the remaining three Rails (D) with the other Posts (A and B)
together.
ASSEMBLY INSTRUCTIONS
1/4" x 5/8" Bolt
(12 used in this step)
5
①