3
1/4" x 5/8" Bolt
(4 used in this step)
3. Align and attach the Back Cross Assembly (J) between the Back Stretcher (K) and the Back Legs (C
and D) with four 2-1/2" Bolts (3) and four Plastic Washers (5).
4. Attach one Mattress Side Rail (I) between the Back Legs (C and D) with four 5/8" Bolts (1).
Assembly Instructions
K
5
3
K
J
C
①
1/4" x 2-1/2" Bolt
(4 used in this step)
J
5
C/D
I
1
1
③
DO NOT
4
C/D
I
Plastic Washer
(4 used in this step)
⑤
fully tighten the bolts.
D