PNI HUNTING 280C Manual De Usuario página 6

according to the settings.
17. OK (Set/Save)
18. UP. When the camera is in SETUP mode, press the UP key to enter
the playback mode.
19. LEFT
20. DOWN
21. RIGHT. When the camera is in SETUP mode, press the right key to
display the time on the screen.
• Move the switch to the ON position. The LED indicator will flash 5
times, then the camera will enter PIR Auto Mode.
• Move the switch to the SETUP position. The LCD screen will light up.
The camera will enter Test mode.
• Move the switch to the OFF position. The camera will turn off.
Basic instructions
Battery supply
PNI Hunting 280C hunting camera works with 6 or 12 AA alkaline or
Ni-MH batteries. We recommend that you do not use Lithium batteries.
Insert the 6 or 12 batteries in the dedicated slot in accordance with the
polarity indicated on the housing.
We recommend that you replace the batteries when the icon indicating
the low battery appears on the camera screen.
Do not use different types or brands of batteries or batteries with a
different charge level at the same time.
The table below provides some approximate information on the number
of photos or videos that can be taken with 12 alkaline batteries.
Testing conditions: Closed LCD screen, Mode: Power on, automatic PIR.
Photo per day
IR lights on
User manual
12 AA alkaline batteries
Time Video per day
IR lights on
Time
6