Drainage Method - Danby Designer DPA100D1MDD Manual Del Usuario

Timer mode
• When the unit is plugged in, but the Power button has not been pressed, the unit is in Standby mode. To set an au-
tomatic time after which the unit should turn on, press the Timer button while the unit is in Standby mode. While the
display is fl ashing, use the Up/ Down buttons to select a time between 0 and 24 hours. The unit will come on AFTER
the number of hours that you have selected have passed e.g. if you select 6 H, the unit will come on after 6 hours.
The Timer symbol on the display will light up to indicate that the Timer has been set.
• To set the duration of the run time using the Timer, the unit must be running (not in stand-by mode). When the unit is
running, press the Timer button. While the display is fl ashing, use the Up/ Down buttons to select a time between 0
and 24 hours. The unit will run for the number of hours that you selected e.g. if you selected 6 H, the unit will run for a
period of 6 hours. The Timer symbol will light up to indicate that the Timer has been set.
• To turn the Timer function off, press the Timer button. The display will start to fl ash. While it is fl ashing, press the
Down button to bring the time down to 0. When the display stops fl ashing, the Timer symbol should disappear from
the display, to indicate that the Timer is off.
DRAINAGE
METHOD
• If the internal container is full of water, the display screen will
display "FL", and the compressor will stop working automatical-
ly. Turn the unit off, unplug it, unscrew the drain cover, pull out
the water plug to drain out the water, and the compressor will
return to normal after being restarted. Ensure that you position
the unit over a fl oor drain to avoid water spills on your fl oor.
OPERATING INSTRUCTIONS
This product is equipped with an automatic water evaporation system. The
condensed water is recycled to cool the condenser, which improves cool-
ing effi ciency and saves energy.
8