DreamGEAR Arcade Fighter Arcade Stick Guia Del Usuario

PACKAGE CONTENTS:
• Arcade Fighter Arcade Stick
• User's Guide/Warranty Card
• Registration Card
HOW TO USE:
1. Power on your Wii Console.
2. Sync the Wii Remote to the Wii Console. (for more information,
please refer to your Wii instruction manual)
NOTE: Use the Wii Remote to navigate through the Main Menu and
start the game. Then perform the following steps.
3. Open Cord Compartment Door on bottom of Arcade Fighter Arcade
Stick.
4. Pull the cord from its compartment.
5. Connect the Wii Remote to the plug at the end of the cord from
Arcade Fighter Arcade Stick.
6. The Arcade Fighter Arcade Stick will automatically power on once
the Wii Remote is connected to the plug.
7. For easier portability, simply wrap up cord and replace into the Cord
Compartment and close Cord Compartment Door.
NOTE: Please check your Game User's Manual for button configuration
for each game.
TROUBLESHOOTING:
Problem: The buttons are not configured correctly.
Solution: Please check your Game User's Manual for button configura-
tion. Also, check the Settings or Options in the Game Menu to change
button configuration.
Problem: The Arcade Fighter Arcade Stick is not turning ON.
Solution: Make sure that the Wii Console is powered ON. Make sure
that your Wii Remote is connected to the plug at the end of the cord
from the Arcade Fighter Arcade Stick properly and securely.