Cisco Systems LINGSYS WUSB54AG Guia De Inicio Rapido página 3

E
From the Wireless Settings
(Advanced) screen, you will
need to choose a type of
network: Infrastructure Mode
or Ad-Hoc Mode.
In the SSID field, enter the SSID
of your wireless network, which
must be identical for all
devices in the network. The
default setting is linksys (all
lowercase). Then, click Next.
F
If you chose Infrastructure
Mode, go to Step G now.
If you chose Ad-Hoc Mode,
select the channel that your
network uses. For the Network
Mode, select Mixed Mode to
allow both Wireless-G and
Wireless-B computers on the
network, or select G-Only
Mode to allow only Wireless-G
computers. Then click Next.
G
Select the security method you
want to use: WEP or WPA -
Personal. (WEP stands for Wired
Equivalent Privacy.) Then click
Next and proceed to Step H.
If your network doesn't use any
security method, select
Disabled and click Next.
Proceed to Step I.
E
F
G
3