Manhattan SIMPLENET 506663 Guía De Instalación Rápida página 2

SimpleNet (Powerline AV500 Ethernet Adapter) • Quick Install Guide English
This quick install guide presents basic installation steps. For operation details
and specifications, refer to the user manual on the included Setup CD or at
manhattan-products.com.
Setup
The SimpleNet Powerline AV500 Ethernet Adapter is a Plug and Play device. By
simply pressing a button, you can securely connect to the Internet or to other
devices (computers, Blu-ray players, game consoles, etc.) on a network.
1. Use the included Ethernet cable to connect the
adapter to your modem or router. If you are
setting up with the Starter Kit, connect one of the
two included adapters to your modem or router.
2. Plug each adapter into an AC power outlet near
the device which you'll be connecting to that
particular adapter. Caution: Don't plug SimpleNet Adapters into a power
strip or outlet that uses surge protection, as this may prevent them from
working properly.
3. Once a SimpleNet Adapter is
connected and powered, it
will look for other SimpleNet
Adapters (bridges) connected
to the same wiring system in
your building. When another
adapter is found, the PL
(Powerline) LED will light.
Remember that you need at
least two SimpleNet adapters
connected to the building's
wiring system for this to work.
Note: If the PL LED lights red,
it means that a connection's
been established, though
not necessarily at optimum
speed. The connection speed
should still be fast enough for online gaming and video streaming.
2
ENGLISH
Security /
Reset
button
Modem / Router
Internet
SimpleNet SimpleNet
Powerline Powerline
AV Ethernet AV Ethernet
Adapter Adapter
Ethernet
port
SimpleNet
Powerline
AV Ethernet
Adapter
SimpleNet /
Powerline