Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IV. Satellite speakers configuration options
A. Mounting option #1
Complete soundbar
TV
440mm
440mm
1.
Join together both satellites into a one-piece soundbar and place it underneath your flat TV.
B. Mounting option·#2
Twin towers using stand for floor or desktop placement
B1
A1
A2
B2
1.
To assemble the satellite speaker with the stand, match the A1 tab with the B2 groove, and the
A2 tab with the B1 groove.
2.
Twist to the left until it locks in place.
C. Mounting option #3
Traditional satellite placement (wall mount split)
1. Install speakers on each side of the TV using the key holes on the back of each unit. Hardware is
not included.
V. Preliminary steps
1.
Start by installing the two AAA batteries included with the system to operate the remote control.
2.
Proceed to insert the left and right satellite speaker plugs into the matching output jacks on the
back of the main unit.
3.
Connect the left (red) and right (white) RCA plugs into the matching input jacks on the back of
the main unit.
4.
Then proceed to connect the supplied RCA to stereo adapter cable for wired playback from
audio devices fitted with a 3.5mm jack.
5.
Now connect an external audio device, such as a high-definition TV, laptop, MP3/4 player,
smartphone or tablet.
6.
Plug the AC cable into a wall outlet.
Turn on the speaker by turning the main power switch on the back of the unit to its ON posi-
7.
tion. After that, the user can also press the red power button on the remote control to toggle
between active and standby modes.
Publicidad
Tabla de contenido
