Ordering Information - Pima KAS143 Instrucciones De Instalación

How to install the KAS
Follow the next steps to install the keypad.
1. Insert a slotted screwdriver to the notch on the bottom of the keypad, press the backplate and remove it.
2. Use the mounting holes (no. 1 in the above figures) and mount the backplate on a flat surface. Make sure to use the tamper's hole
(no. 2 in the above figures), so the tamper will switch when the backplate is removed from the surface.
3. Insert the supplied batteries; observe polarity!
4. Enroll the keypad by pressing the enrollment button
Wireless Peripherals
guide 2 (in the
5. Attach the keypad to the mounted backplate, top side first, and press until clicked.
6. Test the keypad in the

Ordering information

 KAS143: P/N 8833002
1 In the VISION alarm system, enrollment requires an LCD keypad.
2 P/N: 4410526.
menu).
Tests and Diagnostics
menu.
 KAS187: P/N 8833014
1 (no. 5 in the above figures); see how in the FORCE and VISION's Programming
-2
-