Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Guide
User's Manual
Please operate strictly according to the Instruction.
Don't modify the product.
CAUTION
•Apply to 100-240 V ~ , 50/60 Hz power supply.
•Cut off power before installation
•It is suitable for Ceiling surface.
•Do not use the lamp in a high temperature or humid area in order to
avoid lamp damage.
•LED lighting source, do not stare at the lights for long time.
•Do not open the product, the Led lighting source is irreplaceable.
•The lighting and focus could cause painful burns heated.
•Use gloves or a clean cloth when handling.
WARNING
To reduce the risk of fire, electric shock, or injury to persons:
•Do not install the fixture near any type of fuel could cause a fire.
•Before installing, disconnect the power source.
•For indoor use only.
INSTRUCTIONS
1. Locate the place position (1).
2. Verify that you are disconnected the power source.
3. Install metal bracket (2) using anchorages (3) and screws (4) included,
in the desired location.
4. Connect the output cable driver (5) in relation to the cable "Line"
(L) and "Neutral" (N).
5. Secure the base (6) of the fixture with the metal support using the
side screws (7).
6. Turn the lighting in the desired direction.
Attention: Please check whether the lamp is fixed and wired properly
if the lamp doesn't work while switching on.
SPECIFICATIONS
Luminous
Watts
Code
flux (lm)
(W)
LSL01
200
3
LSL02
360
6
LSL03
540
9
WARNING: Read, understand and follow the safety rules in thist document, before operating this product.
Luminario Spot LED
Spotlight LED
Voltage
Frequency
Temperature
Current
(V)
(Hz)
(K)
(mA)
100-240
50/60
3000
100-240
50/60
3000
100-240
50/60
3000
CONTENTS
All models includes:
Anchors x 2
3
2
4
300
300
300
LSL01- LSL02 - LSL03
E N G L I S H
Metallic support x 1
Screws x 2
1
7
5
6
Publicidad
