Password Protection - Toguard H70 Manual Del Usuario

14.Photo stamp
EN
Turn on/off display of watermark on photo

15.Password protection

Select "Password protection". Press "OK", and then select "ON" to set the
password of the camera. The password is a 4-digit number selected
between 0-9.
If the password is lost, press MENU key and REPLAY at the
same time, and slide the operating mode selector from OFF
to SETUP position. The camera is unlocked.
16.Beep sound
Turn on/off beep sound
17.Format memory card
Select to format memory card on this camera, we suggest format the
memory card on computer then format it on this camera again for first
use.
18.Serial NO.
Press "OK", and then select "ON" to set the serial number for the camera.
You can use a combination of 4 digits to documents the location on the
photos. When using several cameras, this makes it easier to identify the
location when viewing photos.
19.Reset settings
Select to reset the camera to the default settings.
Please note to set date and time again.
12