Important Safeguards - Hamilton Beach Professional 70825 Manual De Instrucciones

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
1. Read all instructions.
2. This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they
are closely supervised and instructed concerning use of the
appliance by a person responsible for their safety.
3. Close supervision is necessary when any appliance is used by
or near children. Children should be supervised to ensure that
they do not play with the appliance.
4. To protect against risk of electrical shock, do not immerse
base, motor, cord, or plug in water or other liquid.
5. Unplug cord from outlet when not in use, before putting on or
taking off parts, and before cleaning.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged supply cord or
plug, or after the appliance malfunctions or has been dropped
or damaged in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard.
Call the provided customer service number for information on
examination, repair, or adjustment.
8. The use of attachments not recommended or sold by the
appliance manufacturer may cause fire, electric shock, or
injury.
9. Do not use your food processor if any part is broken.
10. Do not use appliance outdoors.
11. Do not let cord hang over edge of table or counter, or touch
hot surfaces.
2

IMPORTANT SAFEGUARDS

12. Keep hands and utensils away from moving blade and disc
while processing food to reduce the risk of severe personal
injury and/or damage to the food processor. A rubber scraper
may be used but ONLY when the food processor is not
running.
13. The blades and discs are sharp. Handle carefully. Store out of
reach of children.
14. To reduce the risk of injury, never place cutting blade or disc
on base without first putting work bowl properly in place.
15. Be certain lid is securely locked in place before operating
appliance.
16. Never feed food into food chute by hand. Always use the food
pushers.
17. Do not attempt to defeat the lid interlock mechanism.
18. Make sure the blade or disc has come to a full stop before
removing lid.
19. To reduce the risk of injury, be sure to insert or remove blade
and disc using hubs provided for this purpose. Use caution
when removing blade and disc from the work bowl, when
emptying the work bowl, and when cleaning.
20. Check that controls are clear of objects and hands before
plugging cord into wall outlet. To disconnect, press "STOP";
then remove plug from wall outlet.
21. Always use the pushers to clear the food chute. When
this method is not possible, unplug cord from outlet and
disassemble unit to remove the remaining food.