DeFelsko PosiTector DPM L Guia De Incio Rapido página 5

Once connected, the probe LED will flash every 3 seconds and
the PosiTector DPM L will automatically download any previous-
ly logged datasets to the PosiTector App. The battery icon in the
top left corner shows the battery level of the probe.
The user can now Start Logging (see Logging Mode pg. 5),
View Live Data (pg 4), View Logged Datasets (pg. 6), or
change the temperature Units (pg. 4).
NOTE:
The first time a probe is connected, the instrument will display in
View Live Data (pg 4). Once datasets have been logged, the last
logged dataset will be displayed.
More detailed instructions on using the PosiTector App are avail-
able in the Help File, located at www.defelsko.com/app-help
To view available probes, select Bluetooth Smart from the
gage's Connect menu. Then select Smart Probes. Available
probes will appear as "DPM L" with the corresponding serial
number and most recent Dew Point temperature reading, as
shown below:
NOTE:
The last measured Dew Point temperature reading is shown.
Connecting to the Probe using
the PosiTector Advanced
3
Checking the
Shortcut box
on the Smart
Probes screen
will enable
access to the
Smart Probes
screen from
the gage's
main menu: