Installation - table top (continued)
4. Inserting the ember bed
Arrange the ember beds (acrylic crystals [D]),along
the inset window ledge at the front of the electric
firebox (A).
5. Installing the glass front
NOTE: This glass front is heavy. It is recommended that
you use two people at this stage to prevent damage to
the glass front or the electric firebox.
Lift the glass front (B) into place, making sure the 2 tabs
on the top back of the glass front (B) fit securely into the
holes on the top of the electric firebox (A).
Secure the glass front (B) by fastening two small screws
①
( ) on both sides.
M4x8
①
x 2
A
A
STAND
10/
37
D
B
①