Monitor Installation - Beeper RWEC110X-N Instalación Y Uso

5. MONITOR INSTALLATION

SCREEN POSITION
We recommend you to define the perfect position of the screen with the user of the vehicule.
The ideal position of the screen is on the bottom of your windshield (standard location of a GPS).
If this position is not possible or does not suit you, you can position the screen on the dashboard.
Make sure that the screen is not too visible from the outside of the vehicule so as not to attract thieves.).
The screen should not hide the vision of the driver.
!
SCREEN SUPPORT FIXATION*
• Attach the bracket using the spplied adhesive and screw it if possible on the specified location.
• Screw the square on the back of the screen onto the support, using the spanner adjuster.
18 cm 1,7 cm
• Drag the square in the slide (on the back of the screen) to adjust the height of the screen on the
bracket, then tighten the knob.
*After removing the grease, you
17,8 cm
can also use a primary (ref:
RX-PR01, not provided in this kit)
to make sure the support is well
fixed.
Bracket
(with adhesive
Square & slide
9,1 cm
provided)
20