Cloud Nine C9-HD2.0 Manual Del Usuario página 6

Hairdryer booklet_Layout 3 12/05/2016 13:06 Page 6
Using the Cloud Nine Professional Hairdryer
Before using your hairdryer, ensure that hair is thoroughly towel dried.
To quickly blast dry hair, use without fixing a nozzle.
For precision drying, fix either the 60mm or 75mm nozzle.
When the hair is dry, fix in the style by pressing the Cold Shot Button and continue drying the hair for a further 2 minutes.
Using the Upper switch select power required
Using the Lower switch select the temperature
The LED on the back of the handle will show blue when
Button is activated. It will show red when (
Commence styling ensuring at all times the hair does not come into contact with the Suction/air inlet filter
which is located at the back of your hairdryer.
After use, your hairdryer should be run on the cold setting for 1 to 2 minutes. Unplug your hairdryer from the
mains electricity supply and allow to cool down completely before storing in a safe place.
Your Cloud Nine Hairdryer is supplied with 1 x 60mm and 1 x 75mm precision drying nozzles.
To fix or remove the nozzle from the hairdryer, align the black and white alignment markers (image 10)
and twist the nozzle to lock in position.
Your Cloud Nine Hairdryer is supplied with a fixed 3 pin UK plug and 13A replaceable fuse.
0 = OFF
l = low power
ll = High power
= Cold
l = Medium Temperature
ll = High Temperature
Cold Temperature is selected or when the Cold Shot
l ) Medium or ( ll ) High Temperatures are selected.