Settings Menu - Kensington BungeeAir Protect Guía Rápida

Settings Menu

The following settings can be changed within the Settings menu:
1. Changing the default range of the system. TThe range can be shortened from the
default of approximately 75 ft / 23 m down to about 50 ft /15 m using this slider.
The actual working ranges are dependent on the user environment.
2. The system sounds can be turned on or off using this slider.
3. The fob vibrate feature can be turned on or off using this slider.
4. The radio in the BungeeAir adaptor can be turned on or off using this slider. When
turned off the adaptor and fob will not communicate with each other. Remember
to turn off your BungeeAir adaptor where radio devices are prohibited.
5. Reminders can be turned on or off using this slider.
Troubleshooting
The following pages take you through the potential troubleshooting options.
No LED indication on fob
Check batteries are good and installed correctly.
Pressing "Find My Fob / Find my iPhone 4" doesn't produce a sound on the unit I
want to locate
The fob and adaptor are outside BungeeAir's operating range. Walk a short distance
and try again.
2 different alarm tones from the fob are heard when moving out of range
The first 10 seconds of the alarm is a simple reminder that the fob and adaptor has
separated. After 10 seconds, the alarm pattern will change.
1
2
3
4
5
17